Wind Design Considerations for the Central US

RS24-ILXX01

1.5 LU|HSW

Course expires on: 11/06/2027

$30

Architect$30

Member Price

$45

Non-member Price

Description

Led by an experienced Disaster Mitigation, Resilience, and Hazards consultant, this course begins with a review of high wind hazards pertaining to the State of Illinois, but is applicable to most midwestern states. Get an overview of how wind forces act upon a structure and the various codes and standards that regulate wind design. Review case studies of how severe wind events have damaged existing structures. Finally, get an introduction to the AIA Disaster Assistance Program and how architects can become involved in assisting their communities post-disaster.

This course is presented in partnership with AIA Illinois.

Learning Objectives

check

Identify the types of winds that occur in Illinois and what is unique about each one.

check

Gain a basic understanding of the loads that wind forces exert on structures and what to look for when determining a building’s exposure to wind.

check

Identify common failure modes and the importance of a complete load path by using photographs from post-disaster evaluations.

check

Recognize codes, standards, and other resources governing proper wind resilient design methodologies.

Instructors

Rose Grant

AIA, CPCU

Rose Grant, AIA, CPCU is an architectural consultant and immediate past-chair of the AIA’s Disaster Assistance Committee. She has been active in disaster research for over two decades conducting field evaluations of hurricane and tornado damage, as well as ice storm and hailstorm investigations. From 1995 to 2018 Rose was engaged as a research architect in State Farm’s Technology Research And Innovation Laboratory (TRAIL). As a research architect Ms. Grant identified construction trends and conducted research to determine performance attributes of buildings exposed to natural hazards. She was responsible for liaison activities within the building research community and assisted with policyholder and public education on risk recognition and hazard mitigation.

Rose has served on numerous national committees, most recently the National Institute of Building Science’s Multihazard Mitigation Council and the Council on Finance, Insurance and Real Estate as well as the NIST Community Resilience Panel. Rose holds Bachelors and Master’s degrees in Architecture from the University of Illinois and is a licensed architect. Ms. Grant is a California Office of Emergency Services (Cal OES) certified disaster Safety Assessment Program (SAP) trainer. She has earned the insurance industry Chartered Property and Casualty Underwriter (CPCU) designation. And, Rose has been awarded several insurance / building related patents.

View details

Similar courses

card_membership

Included in subscription

Design for Equitable Communities: AIA Framework for Design Excellence

This interactive self-paced course introduces the Design for Equitable Communities principle of the AIA Framework for Design Excellence. It includes perspectives from planners and architects on how to create more equitable places through design processes and strategies. The Design for Equitable Communities principle provides architects and design professionals guidance on how to enter every project ready to listen to and elevate the voices of those who are most impacted by the spaces they create. This course provides examples from the field as to how others are already creating more equitable outcomes through architectural practice. These outcomes include creating spaces where everyone can actively participate in the envisioning, design, and creation of projects. Focusing on inclusivity through participation can help reduce the inequity that exists between communities, encourage self-determination, and improve the quality of life for everyone. Course expires on 10/4/2026.

1.50 LU|HSW

$35

Architect$35

Member Price

$50

Non-member Price

Learn more chevron_right 4.18

card_membership

Included in subscription

The Built Environment’s Carbon Challenge

Learn actionable strategies to reduce carbon emissions and address climate change through sustainable design and construction practices in the AEC industry. Gain a comprehensive understanding of carbon’s impact on the environment, explore the critical role of the built environment in global emissions, and learn practical methods to reduce both operational and embodied carbon in design and construction. Key topics include the principles of embodied, operational and avoided carbon, energy-efficient and passive design strategies, and sustainable material selection. The course also covers critical U.S. policies and frameworks such as LEED certifications, federal and local regulations, and AIA 2030 Commitment—equipping professionals with the knowledge to navigate evolving sustainability standards while leading decarbonization efforts.

2 LU|HSW

$35

Architect$35

Member Price

$50

Non-member Price

Learn more chevron_right 4.00

card_membership

Included in subscription

Materials: The Big Idea (Materials Series Course 1)

You wouldn’t buy a car without checking its gas mileage, so why wouldn’t you want to know what goes into your building? In this course, you’ll learn about the potential health and environmental impacts of the products that go into our buildings. You’ll also look at key drivers pushing transparency in the marketplace including client demand and green rating systems. This course is sponsored by CertainTeed

1.00 LU|HSW

$30

Architect$30

Member Price

$45

Non-member Price

Learn more chevron_right 4.25

card_membership

Included in subscription

Environmental Impacts: Making a Difference (Materials Series Course 2)

Often material impact is evaluated while a product is serving a useful purpose in a building, but that only accounts for a portion of the product’s complete life cycle. This course unpacks the entire product life cycle along with the unique environmental impacts at each phase. You’ll learn best practices for improving the environmental performance of materials through a variety of strategies, including designing for deconstruction at the end-of-life. This course is sponsored by CertainTeed

1.00 LU|HSW

$30

Architect$30

Member Price

$45

Non-member Price

Learn more chevron_right 4.32

card_membership

Included in subscription

Health Impacts: Connecting Building Materials, Human Health, and the Environment (Materials Series Course 3)

Dive deeper into the relationship between building materials and human health in this eye-opening course. You’ll discover the three ways substances move from the environment into our bodies. You’ll also learn about health risks—what makes certain populations more vulnerable and why health impacts can vary from person to person. Embracing the precautionary principle is one of several actions explored in this course to help you better consider human health risks when selecting materials. This course is sponsored by CertainTeed Course expires on 6/12/2025

1.00 LU|HSW

$30

Architect$30

Member Price

$45

Non-member Price

Learn more chevron_right 4.41

card_membership

Included in subscription

Life Cycle Assessment: Tools to Reduce the Environmental Impact of Buildings (Materials Series Course 4)

Life cycle assessment (LCA) is a useful tool for understanding products and whole buildings. This course simplifies the LCA process and describes its limits and opportunities for architects. You’ll also review an extended case study that reveals how one firm embraced LCA to deliver a LEED Platinum office building. This course is sponsored by CertainTeed

1.00 LU|HSW

$30

Architect$30

Member Price

$45

Non-member Price

Learn more chevron_right 4.32

card_membership

Included in subscription

Materials & Health: Understanding the Tools (Materials Series Course 5)

There are a number of materials selection tools on the market, all designed to help you make healthier project and product decisions. But how do you choose? This course shows you how. You’ll learn about tools in the four categories—inventory, screening, assessment, and optimization—including what you can expect to find in any tool in specific category. In the last section of the course you’ll get practical advice for using the tools to make decisions, influence stakeholders, and manage risk. This course is sponsored by CertainTeed

1.00 LU|HSW

$30

Architect$30

Member Price

$45

Non-member Price

Learn more chevron_right 4.30

card_membership

Included in subscription

Buildings and Energy

This session from the The U.S. Department of Energy Solar Decathlon® Building Science Education series, presents the fundamental physics of power and energy and discusses how and where buildings use energy. Topics addressed include the impacts of buildings using energy, measuring power and energy, energy flows in the United States, buildings and the electricity grid, reading an electricity bill, and energy codes. The U.S. Department of Energy Solar Decathlon® Building Science Education series is designed to educate students and working professionals on building science principles that are paramount to the successful design of high-performance, energy-efficient buildings. AIAU offers architects and design professionals courses that aim to educate on: Brought to you in partnership with the U.S. Department of Energy Solar Decathlon.

1.25 LU|HSW

$30

Architect$30

Member Price

$45

Non-member Price

Learn more chevron_right 4.00